20V 5A 40-Channel Hybrid Battery Reconditioner Car Battery Balance Diagnostics Ni-MH Hev Lead Acid Battery Reconditioning Machine for Toyota/Lexus

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Model NO.: ACEY-ACTS-20V5A-GGS
• Channels: 40 Channels
• Power Supply: AC220V, Frequency50Hz
• Battery Type: Li-ion/Lead-Acid/Ni-CD/NiMH Battery and So on
• Accuracy: 0.02%Fs
• Transport Package: Plywood
• Trademark: ACEY
• Origin: Xiamen China
• Production Capacity: 500 Sets/Month

Product Description

20V 5A 40-Channel Hybrid Battery Reconditioner Car Battery Balance Diagnostics Ni-MH HEV Lead Acid Battery Reconditioning Machine For Toyota/Lexus

 

Product Description

ACEY-ACTS-20V5A-GGS hybrid battery reconditioning equipment is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on.

Support battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.

Working Environment

Power supply: AC220V±10%, frequency: 50HZ±5%;
Working temperature: :25ºC±3ºC.
Humidity: ≤ 85%R.H (non-condensing)
No severe shake, no corrosive gases, no flammable or explosive gases around.

Product Parameters

 

No.	Item		ACEY-ACTS-20V5A-GGS
1	Main channels		40Channels (8CH/module)
2	Channels working mode		Independently
3	Main channel working mode		Charge: CC, CV, CCCV,  no voltage or current impact when CC transfer to CV
			Discharge: CD, CP, CR
			Still
	Ending condition of main channel		Time, total voltage, total current, capacity, -ΔV, Vcell, RSOC, Temperature (NTC detection temperature and GGS temperature), etc.
4	Main channel Voltage	Test range of voltage	0V-20V
		Min. discharge voltage	1.5V
		Accuracy	±0.02%FS+0.02%RD(@25±3ºC)
		Resolution	0.1mV
	Main channel Current	Test range of current	±5A
		Min. output current	20mA
		Accuracy	±0.02%FS+0.02%RD(@25±3ºC)
		Resolution	1mA
		Current start response time	<10ms
	Time	Resolution	10ms
	Power	Output power	Single channel continuous working power 100W
		Stability	±0.05%FS+0.05%RD
	Auxiliary channel parameter cutoff function		Main channel step can be set to stop or jump when auxiliary channel signal reach to a certain condition.
5	ACTS Communication		LAN
6	GGS Communication (Optional)		SMBUS, I2C, HDQ
			Support reading 100kHz and 400kHz communication frequency battery information (software can be set and switched)
			Support single channel independent operation of different data communication protocols. (If GGS communication and INA231 communication are selected)
			Support multi-channel simultaneous sampling, and the data recording interval of the same channel is ≥ 1s (The same table as the charge and discharge data)
7	Control program		Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online.
			Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, etc.
			Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature.
			Cycle time	Max. 9,999
			Programmable step	Max. 9,999
			Nested loop	Max. 10 layers
			Step time range	No limit, support h, min, s
			Data record	Maximum recording time:10ms, voltage≤0.02%FS, current ≤0.02%FS
			Program feature	Each step has one or multiple exit
			Barcode scan	Support
8	Data display		Cycle list	Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc.
			Process list	Process number, working mode, process time, capacity, power, medium voltage, cut-off voltage, cut-off current, etc.
			Detail list	Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, etc.
9	Data export		Data can be exported as EXCEL, TXT or diagram. Provide charge discharge efficiency, charge discharge curve, voltage, capacity, current-time characteristic curves, etc.
10	Data saving		Save as files
11	Curves type		X-coordinate: total time, charge discharge capacity, cycle time
			Y-coordinate: total voltage, current, capacity, power, cell temperature
12	Software protection		Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection
	Hardware protection		Power off, open circuit and short circuit protection. Reverse or wrong connection protection, OCP, OVP, OTP.
	Warning function		Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically.
13	Sampling terminals		Four-polar sampling. Crocodile clip or other clips.
14	Energy consumption		Heat dissipation
15	Cooling method		Forced Fan-cooled
16	Voice		Less than 70dB(Single set)
	IP grade		IP20
17	Repair		Modularized structure. Can be replaced or repair with spare parts.

 

Product Size

 

Cabinet size	920*722*1805mm
Weight	≤300KG
Channel number	40CH
Remarks :The above picture is for reference only, subject to the kind!

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.