| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Warranty: | 1 Year |
|
Still deciding? Get samples of US$ 7100/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Lithium Battery Pack Protection System Tester 24 Series Plate BMS Tester for Battery Management System Testing
It is applied to the safety test of 1-24series lithium battery protection boards to detect whether the functional parameters of the BMS boards are within the reasonable parameter range, and provide a set of testing standards for the staff, which is conducive to improving the production efficiency, facilitating quality control, and compatible with the common types of protection boards on the market, including positive BMS same port (split port), negative BMS same port (split port), positive charging and negative discharging, etc.
power supply: AC voltage 220V ± 10%, frequency 50Hz ± 10%;
ambient temperature: - 10 ~ 45 ºC;
the environment is free from strong vibration, corrosive gas and flammable and explosive gas.
| Model | ACEY-BMS24-200 |
| Purpose | Used for battery protection board test of 24strings and below |
| Basic function | Overcharge and discharge voltage test |
| Overcharge recovery and discharge recovery test | |
| Internal resistance test | |
| Over current protection test | |
Unique test items |
Short circuit protection test (microsecond level) |
| Single section self power consumption test (refers to the true and accurate self power consumption of each section) | |
| current and opening voltage Balancing test | |
| Infrared scanning (bar code scanning) the ID of each protection board and store the record | |
| BMS Type | LiFePo4 LicoMnNi02 |
| Module | High current module: the current level is 200a and the current accuracy is 0.1A |
| Voltage module: programmable output 0.5-5v, accuracy ± 1mV | |
| Short circuit module: super capacitor, fully simulating pack battery voltage |
| Test Items | Test Range | Resolution |
| Number of test strings | 1-24S | |
| Benchmark voltage | 0.5-5V | ±1mV |
| Overcharge protection voltage | 0.5-5V | ±1mV |
| Overcharge protection release | 0.5-5V | ±1mV |
| Over discharge protection voltage | 0.5-5V | ±1mV |
| Release of over discharge protection | 0.5-5V | ±1mV |
| Over discharge current protection value | 1-200A | ±0.1A |
| Overcharge current protection value | 1-40A | ±0.1A |
| Overcurrent protection delay | 0-10S | ±1ms |
| Overcharge / discharge protection delay | 0-20S | ±1ms |
| Balancing opening voltage | 0.5-5V | ±5mV |
| Balancing opening Current | 0-200mA | ±1mA |
| Single Cell self power consumption | 0-500uA | ±1uA |
| Loop internal resistance test | 0-200mΩ | ±1mΩ |
| Short circuit protection (more than 6 strings) | 0-9999uS | ±1uS |
| Online settings | serial communication | RS232 serial port |
| Testable type | Hardware protection board and most software boards (special software boards need to be communicated) | |
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
){kind=link}