| Customization: | Available |
|---|---|
| Control: | Automatic |
| Cooling Way: | Water Cooling |
|
Still deciding? Get samples of US$ 6950/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
ACEY-S200B Single sided spot welding machine is used to weld nickel sheets with many lithium batteries into a group pack, which is suitable for lithium battery pack assembly in the factory for 14500 18650 21700 26650 32700 etc multi-parallel multi-series combination.
This machine adopts three welding methods:
Fixed voltage welding : Control the voltage between electrodes, reduce the amount of current, and reduce the generation of sparks during welding
Fixed current welding: passing a certain amount of current, independent of the workpiece resistance, can stabilize welding
Fixed voltage&Fixed current welding: Welding is controlled by setting both current and voltage simultaneously
Output current direction:
MDA-10000B current flows from the positive electrode to the negative electrode (unipolar welding), mainly suitable for power batteries.
MDB-4000B (polarity conversion welding), mainly suitable for digital batteries.
Completion signal: 0-99MS can be set.
Suitable welding range: power batteries/digital batteries/nickel hydrogen nickel chromium batteries/motor rotors/electronic and electrical accessories, etc
Welding thickness: 0.08-0.2MM nickel plating or pure nickel (it is recommended to open a flow guide groove for 0.15-0.2MM nickel plates, while nickel plates above 0.2MM need to be welded with protruding points).
Can set preheating current, welding current, and cooling
With slow current rise/fall function
Easy to install and use
Fault diagnosis and automatic protection function
Communication interface: RS485
Independent external touch screen interface
Can be controlled by an external industrial computer/PLC, and cooperate with machine automation production
1. Stroke:500*400mm;
2. Welder: electric transistor 8000A/10000A
3. With water cooling system;
4. Welding head rotation function: support 180 degrees rotation;
5. Operating system: embedded system human-machine interface;
6. Support data storage function;
7. Drive mode: step servo motor;
8. Configuration of three sets of fixtures: 18650 with battery holder set, 18650 without holder set, 21700 fixture set, fixture range: within 500mm;
9. Joystick:Joystick for single-sided spot welder, equipped on single-sided welder;
10.With PC
|
Product Name
|
Single-sided automatic spot welder
|
|
Model No.
|
ACEY--S200B
|
|
Y-axis travel
|
500mm (customizable)
|
|
X-axis travel
|
400mm (dual) (customizable)
|
|
Max spot welding speed
|
0.5s/ spot (1 hour:about 3,600 pcs 18650 cells)
|
|
Motor driving speed
|
1000mm/S
|
|
Max load electric cores
|
X direction: 26; Y direction: 18
|
|
Capable file group storage
|
100 groups
|
|
Operating system
|
Embedded system human-machine interface
|
|
Transmission mode
|
Taiwan precision screw with guide rail
|
|
Size
|
L1020*W910*H1770mm
|
|
Weight
|
220kg
|
|
Max bearing weight of Y-axis
|
30KG
|
|
Input power supply
|
Three-phase AC 380V/50Hz or Single-phase AC 220V/50Hz
|
|
Air Source
|
0.4-0.6 Mpa
|
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
){kind=link}