| Production Scores: | Multiple Varieties |
|---|---|
| Production Continuity: | Continuous |
| Condition: | New |
| Automation: | Automatic |
| After-sales Service: | Engineers Available to Service Machinery Overseas |
| Applicable Industries: | Battery Pack Assembly Line |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
Automatic Li Ion Battery Pack Assembly Line For LiFePO4 EV Battery Pack Assembly
The main section of the pack auto welding line consists of the speed multiplier chain, the length of the chain is 23.4m*1.0m*1.0m*0.75m, there are 11 work stations and 13 sets of work plates, the size of the work plates is 800mm*800mm*15mm (13mm aluminium plate + surface + 2mm glass fibre plate), there are two lifts in front and back of the chain, and there is an F-shape shelf in the manual work station. The single station of the chain can bear 200kg.
*The main section of the multiplier speed chain is welded with 40*40 square pass; the guide rail is made of 118×100 aluminium profiles, the surface of the wire profile is H750mm from the ground; the conveyor chain is made of triple speed chain with pitch=38.1;
* All machines of whole line on both sides of the fully closed door plate, the overall beauty and convenient maintenance and repair, sheet metal colouring according to customer requirements to provide colour code;
*There is a set of buttons on the side of each station to control the rising/falling action of the blocker; each manually operated position is equipped with: an independent start button, an independent socket, an independent air pipe connector, an illuminated light pipe and an independent emergency stop button. When there is a problem with the line, the line can be stopped immediately to protect the safety of employees. Button wiring using plug-in mode, easy to maintain, the entire line of line marking to be basically consistent with the drawings, if there is a change or deviation, we must communicate in a timely manner; the line body between the workstations need to be anti-dumb function (not allowed to repeat the release of the board); alarm needs to be displayed in the touch screen alarm location, alarm information scrolling prompts to deal with the method;
*Motor with Taiwan Yichuan gear motor 2.2KW, 380V; special active/follower sprocket, with the active shaft, the shaft support using a housed bearing seat. Slave with special tightening seat; power frame made of 40 * 40 iron cube; peripheral sealing protection plate; sheet metal with colour according to customer requirements to provide the colour code;
*Frequency converter stepless frequency conversion speed regulation, 2~10 meters/minute.
Technical parameters
| No. | Item | Parameters |
| 1 | Power supply of conveyor | 380V, 50Hz |
| 2 | Power of conveyor | 3.25KW |
| 3 | Dimension | L2340mm*W1000*H750mm |
| 4 | Air source | 0.5~0.6Mpa |
| 5 | Lifting station power | 220V,50Hz |
| 6 | Lifting station power | 1.5KW |
| 7 | Dimension | L1120mm*W1000*H750mm |
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}