100V 100A Regenerative Battery Pack Test System Equipment Battery Charge Discharge Tester

• After-sales Service: Provided
• Type: Finished Batteries Tester
• Test Region: All
• Function: Test Capacity Voltage Current
• Product Name: Battery Charge Discharge Test Equipment
• After-Sales Service Provided: Online Support
• Model NO.: ACEY-HRCDS-100V100A
• Battery Type: Li-ion/Lead-Acid/Ni-CD/NiMH Battery and So on
• Transport Package: Plywood Case Packing
• Trademark: ACEY
• Origin: China
• Production Capacity: 500 Sets/Month

Product Description

100V 100A Regenerative Battery Pack Test System Battery Charge Discharge Test Equipment

Product Description

Application and Function

100V 100A Battery Charge Discharge Test Equipment is mainly used for circle life testing and quality control of li-ion battery, lead-acid battery, Ni-Cd battery, NiMH battery and so on in production line or in lab.

Support battery circle life testing, capacity testing, charging characteristic testing, discharging characteristic testing, charge retention capability testing, charge and discharge efficiency testing, over charge or over discharge rate affordability testing.

Equipment configuration list

 

No.	Category	Product name	Product model	Quantity	Remarks
1	Test equipment	Charge and discharge test equipment	ACEY-HRCDS-100V100A	4CHS
2	Cabinet	Charging and discharging equipment cabinet	/	1PCS	Default without power input line
3	Computer	Computer	Dell computer I5-10500 processor / 16G memory / 256G solid state + 1T hard disk / 3 network port	1PCS	Optional, including mouse, keyboard and 19 inch AOC displayer
4	Accessories	Charge discharge test line	/	4PCS	Each channel has a set of test lines with a length of 3.5meters.(including fixture)
5	Accessories	BMS power supply	12V/24V	2	Optional, 2 channels for each power supply
6	Accessories	Switch	TP-LINK TL-SF1008VE	1PCS
7	Accessories	Communication accessories	Communication line / Crystal head, etc.	Several	For communication
8	Accessories	USB Flash Drive	16G	1PCS	Contains Test software etc.
9	Accessories	File	/	1PCS	Test report, packing list, etc

 

Working Environment and Technical Parameters

1. Power supply of the whole cabinet: AC 380V±10%, frequency: 50HZ±5%. 
2. Maximum input power of the whole cabinet: 44.4 kW (4CHS)
3. Working temperature: 0~ 45.
4. Humidity: less than ≤ 85%R.H (non-condensing).
5. No severe shake, no corrosive gases, no flammable or explosive gases around.
6. Resolution: AD 16 bit.

No.	Item		ACEY-HRCDS-100V100A
1	Main channels		1CH/ module
2	Output power		The maximum power of channel operation is 10kW; timeless
3	Output power stability		±0.1%FS
4	Power quality at input side		Power factor	>99%(full load)
			Total harmonic distortion rate	≤5%(full load)
5	Energy consumption parameters		Standard sine wave feedback energy, high efficiency (optimal efficiency 90%%)
6	Main channel working mode		Charge: CC, CV, CCCV,  no voltage or current impact when CC transfer to CV
			Discharge: CD, CP, CR
			Still
			Working condition test; Pulse test.

 

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.