5V 200A 8 Channel Battery Charge Discharge Test System Lithium Battery Cell Capacity Tester

• After-sales Service: Provided
• Warranty: 1 Year
• Type: Finished Batteries Tester
• Test Region: All
• Application: Lithium-ion Battery
• Customized: Customized
• Model NO.: ACEY-HRCDS-5V200A-8CH
• Product Name: Battery Charge Discharge Test System
• After-Sales Service Provided: Online Support
• Power Supply: AC220V/50Hz
• Transport Package: Plywood Case
• Trademark: ACEY
• Origin: China
• Production Capacity: 500 Sets/Month

Product Description

 

5V 200A 8 Channel Battery Charge Discharge Test System Lithium Battery Cell Capacity Tester

Product Description

It is mainly used in life aging test (Circle Life Testing) and quality control in the production or experiment of lithium-ion batteries, lead-acid batteries, cadmium nickel batteries, nickel metal hydride batteries and other batteries.

Supported test content: battery cycle life test, battery capacity test, battery charging characteristic test, battery discharge characteristic test, battery charge holding capacity test, battery charge and discharge efficiency test, battery overcharge, overdischarge rate bearing capacity test, pulse test, working condition test, etc.
 

Single power supply: AC voltage 220V ± 10%, frequency: 50 Hz ± 5%,

Whole cabinet power supply: AC voltage 380V ± 10%, frequency: 50 Hz ± 5%

Maximum input power of the whole cabinet: 8.8KW (8CH)

Ambient temperature: 0-45

Ambient humidity: not more than 85%R.H (no water vapor condensation)

No strong environmental vibration, no corrosive gas and flammable and explosive gas existence

Resolution: AD: 16bit
 

No.	Item		ACEY-HRCDS-5V200A-8CH
1	Main channels		2CH/ module
2	Channel working mode		Completely independent.
3	Main channel working mode		Charge: CC, CV, CP, CCCV, no voltage or current impact when CC transfer to CV.
			Discharge: CD, CV, CP, CR, DCCV.
			Rest, Pause, Pulse test (minimum pulse width: 20ms),
			Working Condition test, DCIR test.
	Main channel test cutoff condition		Time, total voltage, total current, capacity, -ΔV, Vcell, RSOC, etc.
4	Main channel Voltage	Single channel test range	0V-5V
		Min. discharge voltage	1V
		Accuracy	±0.05%FS
		Resolution	0.1mV
	Main channel Current	Single channel test range	±200A
		Min. output current	200mA
		Accuracy	±0.05%FS
		Resolution	1mA
		Current start response time	<10ms(10%FS~90%FS)
	Time	Resolution	10mS
	Auxiliary voltage	Range	DC: 0-5V
		Accuracy	±0.05%FS
		Resolution	1mV
	Auxiliary temperature	Range	-20~100
		Accuracy	±1(0~70)
		Resolution	0.1
	Power	Output power	Single channel continuous working power 1000W
		Stability	±0.1%FS
5	Communication		LAN
6	Control program		Support data protection when power off, continue testing caused of power cutoff or manually stop and revise step parameter online.
			Users can set protection condition, include minimum voltage, maximum voltage, minimum current, maximum current, etc.
			Users can set auxiliary channel protection condition, including minimum voltage, maximum voltage, maximum temperature, minimum temperature.
			Cycle time	Max. 9999
			Programmable step	Max. 9999
			Nested loop	Max. 10 layers
			Step time range	No limit, support h, min, s
			Data record	Time≥10ms,Voltage≥0.05%FS,Current≥0.05%FS
			Program feature	Each step has one or multiple exit
7	Data display		Cycle list	Circulation number. Charge/discharge capacity, efficiency, power and average voltage, etc.
			Process list	Process number, working mode, process time, capacity, power, DIR, medium voltage, cut-off voltage, cut-off current, etc.
			Detail list	Record number, system time, cumulative time, voltage, current, energy, power, cell temperature, etc.
8	Data export		Data can be exported as EXCEL, TXT or diagram. Provide charge discharge efficiency, charge discharge curve, voltage, capacity, current-time characteristic curves, etc.
9	Data saving		Save as files
10	Curves type		X-coordinate: total time, charge discharge capacity, cycle time, voltage, current, capacity.
			Y-coordinate: total voltage, current, capacity, power, cell temperature(Optional), end of charge and discharge capacity, etc.
11	Software protection		Power off data protection, power resume continue testing, OVP, ODP, OCP, UCP, OTP, capacity protection, abnormal voltage trend protection, abnormal current trend protection, abnormal current fluctuation protection, abnormal voltage fluctuation protection, abnormal charging voltage increase rate protection, abnormal discharge current decrease rate protection.
	Hardware protection		Power off, open circuit and short circuit protection. Reverse or wrong connection protection, OCP, OVP, OTP, fixture contact abnormal protection.
	Warning function		Switch off automatically under emergency, shutdown when power off, load connect and disconnect automatically.
12	Barcode scan		Support barcode start and binding test data, classify batteries rapidly and accurately. Support detailed battery database management functions, connect battery information with testing data base, which is easy for management of data base system.
13	Sampling terminals		Four-polar sampling. Copper nose or other fixture.
14	Energy consumption		Discharge power feedback to grid
15	Cooling method		Forced Fan-cooled
	Noise		Less than 70dB
	IP grade		IP20
16	Repair		Modularized structure. Can be replaced or repair with spare parts.

 

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.