Automatic 2000W Fiber Laser Welding Machine Lithium Battery Welding Machine Automatic Laser Welder for Battery Pack Assembly Line

• Customization: Available
• After-sales Service: Provided
• Warranty: 1 Year
• Model NO.: ACEY-LWGZ-2000W
• Application: Electronic Industry
• Technical Class: Continuous Wave Laser
• Control: Automatic
• Power Density: Heat Conduct Welding
• Laser Classification: Optical Fiber Laser
• Type: Automatic Laser Welding Machine
• Weight (Kg): 1000 Kg
• Laser Type: Continuous
• Warranty of Core Components: 1 Year
• Average Output Power: 2000W
• Power Supply: 380V AC 50/60Hz
• Transport Package: Plywood Case Packing
• Trademark: ACEY
• Origin: Xiamen
• Production Capacity: 500 Set/Sets Per Month

Product Description

Automatic 2000W Fiber Laser Welding Machine Lithium Battery Welding Machine Automatic Laser Welder for Battery Pack Assembly Line

Equipment Requirements

1) Weld thickness: 2mm(adjustable)
2) Weld travel: 700*600*400
3) Weld speed: 30mm/s(adjustable)
4) Laser type: continuous
5) Laser power: 2kw(adjustable)
6) Laser working medium: optical fiber.
7) Laser life: ≥ 5 years.

Process

1) Welding material: aluminum row, copper sheet nickel strip, and support composite welding (such as: aluminum and copper-nickel, copper-nickel-aluminum, etc. welding).
2) Welding available in two modes: continuous welding / pulse spot welding.
3) Weld joint depth of fusion: contact surface depth of fusion 2.6mm or specified by the Party.
4) Weld strength: tensile strength of the welded joint is greater than the breaking strength of the material.

Product Parameters

Model	ACEY-LWGZ-2000W
Power supply(V)	380±10%V AC 50/60Hz
Power capacity(kW)	10
Surrounding environment	Level ground, no vibration and shock
Gas requirement	Compressed air: pressure ≥ 0.6Mpa, gas consumption: 30 L/min. Nitrogen: ≥ 0.4Mpa, gas consumption 15 L/min (No necessary, according to the process can be used)
Ground load-bearing requirements	≥400kg/m^2
Working environment requirements	Working temperature:  10ºC-40ºC Relative humidity : 30%-70%
Pass Rate	≥99%(Excluding defective incoming materials)
Noise	≤75db (measured at 1m from the machine)

Laser System

Average output power	2000W
Center wavelength	1080±10nm
Operating Module	Continuous / Modulation
Maximum modulation frequency	5KHz
Output power stability	<1%
Red light	Yes
Output connector	QBH
Output fiber length	10M
Input power supply	380V
Control mode	RS232/ ADRS232/AD
Power adjustable range	(10-100)%
Power consumption	2000W(Subject to actual)
Weight	<100KG
Cooling method	Water cooling
Operating temperature ºC	10ºC-40ºC

Galvo Lens

Scanning angle	±0.35rad
Tracking time	0.7ms
Repeat Positioning	<15urad
Gain drift	<50ppm/k
Positioning speed	2m/s
Power supply	±15V/5A
Operating temperature	25±10°C
External Dimension	216mm*140mm*180mm
Weight	7KG

Water Cooling System

Machine Model	DLY2000
Power supply	220V ~/50HZ
Nominal cooling capacity	7.3KW
Maximum operating current	23.5A
Maximum operating power	5.17KW
Water flow rate	>33L/min
Water control range	8ºC~30ºC
Water tank volume	38L
Refrigerant/Charge volume	R410A / 1.2KG
Working environment temperature	10ºC~40ºC

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.