| Customization: | Available |
|---|---|
| After-sales Service: | Provided |
| Feature: | High Efficiency |
|
Still deciding? Get samples of US$ 30000/Set
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
300mm High Precision Automatic Electrode Roll To Roll Continuous Heat Rolling Press Machine for Lithium Battery
ACEY-RP-300x350 Automatic Battery Electrode Calendering Machine.The pressure can be adjusted easily by touch screen.The biggest roller press width is 300mm.
|
Equipment configuration and parameters |
|
|
Roll specification |
210 X330mm (roll surface diameter x roll surface width) |
|
Machine speed |
2 ~ 8r /min |
|
Machine efficiency |
0.8~5 M/min |
|
Pole piece or foil type |
Battery electrode sheet |
|
Coating uniformity |
± 0.002mm (Guaranteed) |
|
On the premise that the uniformity of the thickness of the pole piece after rolling is ± 0.002mm, the user guarantees the uniformity of coating, and the layout of the pressure roller is arranged horizontally up and down. |
|
|
Roller appearance |
Gray and blue, with 2 dial indicator installed. |
|
Safety protection device with warning color |
|
|
Roll specification |
210 X330mm (roll surface diameter * roll surface width) |
|
Effective use width |
300mm |
|
Material |
9Cr3Mo series high alloy cold roll steel |
|
Surface hardness |
Above HRC66 |
|
The depth of quenching layer |
18 ~ 25mm. |
|
Chromium plating of rolls |
0.18MM |
|
Roll diameter jump |
± 0.002mm |
|
Roller surface roughness |
Ra0.04 |
|
Roller clearance adjustment: |
The adjustment screw drives the middle wedge iron adjustment joint |
|
Roll gap adjustment range |
0 ~ 2.0mm |
|
Roller press drives |
Cycloidal pin wheel reducer |
|
Main motor power: |
0.75KW(380V 50Hz) |
|
Pressure mode |
Electric hydraulic pump |
|
Hydraulic cylinder specification |
Cylinder diameter 63mm stroke 15mm |
|
Maximum working pressure |
37TX2 |
|
Working oil pressure |
40MPa |
|
Maximum pressure |
60MPa |
|
The weight of the main machine |
About 1T |
|
Equipment Color |
Yujia Standard Color (Computer Grey) |
|
Heating: |
A closed-loop control heating system is composed of Omron temperature controller, solid state relay and K-type thermocouple. |
|
Heating power: |
1.6KW * 2 (one for upper and one for lower rollers) |
|
Voltage: |
220V |
|
Accuracy: |
2 degrees Celsius. Maximum temperature: 130 degrees Celsius. |
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.
){kind=link}