4 Channel 100V 20A Charge 40A Discharge Battery Pack Aging Machine Regenerative Battery Pack Test System

• After-sales Service: Provided
• Warranty: 1 Year
• Type: Finished Batteries Tester
• Test Region: All
• Application: Lithium-ion Battery
• Customized: Customized
• Model NO.: ACEY-BT10040-4
• Battery Type: Battery Pack
• Product Name: Battery Aging Machine
• Voltage and Current: 100V 20A 40A
• Channels: 4 Channels
• Transport Package: Plywood
• Trademark: ACEY
• Origin: Xiamen China
• Production Capacity: 500 Sets/Month

Product Description

4 Channel 100V 20A Charge 40A Discharge Battery Pack Aging Machine Regenerative Battery Pack Test System

 

 

Product Description

Environmental requirements and technical parameters
Power supply of single channelAC220V ±10% ,50Hz±10%
Power supply of hole cabinetAC380V ±10% , 50Hz±10%
Ambient temperature: - 10~45.
No strong vibration in the environment, no corrosive gases and flammable and explosive gases exist.

Introduction
* Charging and discharging function: with constant current and voltage charging function, constant current discharging function, charging and discharging of the battery, recording the battery capacity.
* Charging and discharging interface: fully meet the requirements of battery pack charging and discharging with the same port and charging and discharging sub-port, i.e. 2 wires (P+ P-), 3 wires (P+ P- C-) and positive plate charging protection, negative pole charging protection. 3 wires (P+ P- C-) and positive plate charge protection, negative plate discharge protection of power tool batteries (CH+ P+ P-).
* Checking voltage protection:detecting whether the battery charge protection and discharge protection are working by charging and discharging the battery.
* Safety protection:anti-reverse connection protection function, power-down data protection, support continuous measurement, voltage upper and lower limit setting protection, and * safe discharge current protection.
* Online mode: the instrument can be connected to PC through serial port for single unit or less than 5 units; for more than 5 units, a network connection mode is adopted and a network port is provided at the PC side to control up to 30 units.
* Control system: The software system adopts the classical and mature C/S mode, with two modes of communication: serial port can achieve accurate communication of several instruments in short distance, and network can achieve accurate communication of multiple instruments in long distance.

Product Parameters

Product Name	Battery Aging Machine
Model No.	ACEY-BT10040-4
Output power	≤4000W
Voltage measurement range	10-100V
Voltage and current detection sampling	Four-wire sampling
Accuracy	±1‰
Dismension(Whole cabinet)	900*600*1600mm (W*D*H )

 

 

 

 

 

 

 

 

 

 

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.