Customization: | Available |
---|---|
After-sales Service: | Provided |
Warranty: | 1 Year |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Laboratory Battery Large Vacuum Automatic Electrode Film Coater Machine Three-Roll Transfer Coating Machine
ACEY-TRC400 is a three-roll transfer coating equipment, which is convenient to apply to various substrate surface coating processes. Especially used in the lithium-ion battery industry, the equipment is designed to be convenient for researchers to use, and to meet the requirements of coating accuracy and consistency, which is no different from production. The drying effect is excellent. It is a lithium-ion battery, super capacitor, nickel battery and others. Ideal for R&D of secondary batteries.
*Substrate tension control, stable tape travel, equipped with deviation correction device;
*Hot-air oven, upper and lower double-sided blowing, high-quality drying effect;
*Three-roll transfer coating, with a wider coating window;
*Comma squeegee measurement, with precision adjustment mechanism, to obtain high coating precision;
*PLC control, touch screen operation, convenient and easy to use;
*Optional solvent recovery processing device;
Product Name
|
Three-roll transfer coating equipment
|
Model No.
|
ACEY-TRC400
|
Suitable system
|
lithium iron phosphate, lithium cobalt oxide, lithium manganate, graphite, silicon carbon and other system battery positive and negative sheet coating process |
Coating method
|
continuous coating, intermittent coating
|
Number of oven sections
|
1.5m/section, 3 sections in total, three sections of temperature control, SUS304 stainless steel
|
Heating method
|
electric heating, hot air circulation structure
|
Temperature in the drying tunnel
|
Designed to Max150, the temperature difference in a single oven is 5
|
Mechanical speed
|
not less than 4.5m/min
|
Operating base material thickness
|
aluminum foil (Al): 8~30um copper foil (Cu): 8~30um
|
Designed width of roller surface
|
400 mm
|
Scraper
|
round jump±1.5um, Ra0.4, straightness±1.5um
|
Coating roller (steel roller)
|
circle runout±1.5um, Ra0.4 straightness±1.5um
|
Rubber roller
|
circle runout10um, straightness10um
|
Surface treatment of the roller
|
the surface of the metal aluminum roller is oxidized, and the circle runout 30um
|
Guaranteed coating width
|
not less than 330mm
|
Coating accuracy
|
better than ±3um (edge error ±5um)
|
Double-sided coating weight accuracy (mg/cm2)
|
coating center value ±1.0%
|
Suitable for slurry viscosity
|
2000~12000 (mPas)
|
Single-side coating dry thickness range
|
30~200m
|
Thickness adjustment
|
free adjustment, dial indicator display accuracy 1um
|
Coating length
|
gap: single piece Max.10000mm, blank 8~120mm, accuracy ±0.5mm
|
Rewinding correction accuracy
|
±0.5mm
|
Winding tension
|
automatic control of constant tension, tension range 0~80N
|
Solvent characteristics
|
oily solvent NMP (sg=1.033, bp=204) / water-based solvent H2O/NMP (sg=1.000, bp=100)
|
Suitable solid content range
|
20~85%
|
Coating size accuracy (mm)
|
L±1, W±0.5 L: length direction
|
Position accuracy of front and back faces (mm)
|
L±1, W±0.5 W: width direction
|
Main control system
|
touch screen, PLC, module, servo system
|
Operation mode
|
manual, automatic, emergency stop; the whole machine can be operated before and after
|
Appearance size and weight of coating equipment
|
L7100*W1210*H1810mm
|
weight
|
2T
|
Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port.
Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection.
C, After finished by QC full inspection before packing into the next process packing.
D, OQC before shipment for each slipper to do full inspection.
Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.
Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.
Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.
Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.