Coin Cell Cycler Tester for Battery Performance Testing and Capability Grading

Product Description

Coin Cell Cycler Tester For Battery Performance Testing And Capability Grading

 

Product Description

It is now widely used by battery research institutes,laboratories, universities and EV battery manufacturers all around the world. it supports some testings as follow: EV battery pulse charge/discharge, DCIR(Direct Current Internal Resistance), cycle life testing and rate testing.
 

Product Name:				Battery Testing Equipment 5V10MA
Model No.:				ACEY-BT-5V10MA
Input power				AC 220V ±10% / 50Hz
Input active power				709mW
Input Resistance				≥1MΩ
Resolution				AD:16bit;DA:16bit
Voltage	Per Channel Voltage Range			25mV~5V
	Discharge Min Voltage			-5V
	Accuracy			± 0.05% of FS
	Stability			± 0.05% of FS
Current	Per Channel Current Range			Range one:5uA~1mA; Range two:1mA~5mA;  Range three:5mA~10mA
	Accuracy			± 0.05% of FS
	Constant Voltage Cut-off Current			2uA;0.01mA;0.02mA
	Stability			± 0.05% of FS
Power	Per Channel Output Power			0.05W
	Stability			±0.1% of FS
Time	Current Response Time			(0~Full Range)<20ms
	Step Time Range			≤(365*24)Hour/Step
Data Recording	Recording Condition			The minimum time interval:100ms The minimum voltage interval:10mV The minimum current interval:2uA;0.01mA;0.02mA
	Record Frequency			10Hz
Charge	Charge Mode			Constant Current Charge,Constant Voltage Charge,Constant Current and Constant Voltage Charge,CPC
	End Condition			Voltage,Current,Relative Time,Capacity,-△V
Discharge	Discharge Mode			CCD,CPD,CRD
	End Condition			Voltage,Current,Relative Time,Capacity
Pulse	Charge			CCC
	Discharge			CCD
	Min Pulse Width			500ms
	Pulse Number			Each pulse step supports 32 different pulses
	Automated Switch			Automated switch from charge to discharge for each pulse
	End Condition			Voltage, Test Time
Cycle	Loop Measure Range			1~65535 times
	Max Steps Per Loop			254
	Nested Loop			Nested loop Function,Max Support 3 Layers
Protection	Software Protection			Power-down Data Protection
				Off-line Testing Function
				Setting Protection Condition,Setting Parameter:Low Voltage limit,Upper Voltage limit,Low Current limit,Upper Current limit,Delay Time
Noise				<85dB
Channel Features				Constant Current Source and Constant Voltage Source with Independent pairs of Closed-loop Structure
Channel Control Mode				Independent Control
Voltage and Current Testing Sample				4-wire connecting
Database				MySQL Database
A Means of Communication of Upper Machine				TCP/IP Protocol
Data Output				EXCEL,TXT,Graph
Communication Interface				Ethernet Port
Per Unit Main Channels No.				8
Working Temperature Range				0ºC~40ºC
Storage Temperature Range				-10ºC~50ºC
Working Environment Relative Humidity Range				30% ~ 80% RH
Storage Environment Relative Humidity Range				30% ~ 90% RH
Dimensions				1U,W*D*H:480*330*45(mm)

 

 

Q1:How to order?
A: Please send us your purchase order by email or call us sales, or we can make the proforma invoice under your request.We need to know the following information for your order before sending your Pl. Payment methods? T/T, L/C, D/P and so on.
1)Product information-quantity, specification(size, material, technological if needed and packing requirements etc.)
2)Shipping information-company name, street address, phone number,destination sea port. 

Q2: How to control quality?
A,All the raw materials by IQC(Incoming Quality Control) before launch whole process into the process after the screening,
B, Process each ink in the process of IPQC(Input Process Quality Control)patrol inspection. 
C, After finished by QC full inspection before packing into the next process packing. 
D, OQC before shipment for each slipper to do full inspection.

Q3:How do I install and operate the machine myself?
A: Our system development is based on the integrated development view, when you get the machine, just connect it to the power supply and the machine is ready to work, as the English software is already installed on the machine, all you need to do is to learn how to use the software, a complete English user manual will be sent to you with the machine.

Q4: How do I get technical support after purchase?
A: Our factory provides online technical support in English, you can get to know us easily online through Skype, Wechat, WhatsApp or E-mail. If you need any remote assistant support, we will support you through Team viewer software.

Q5:What's the warranty for the items?
A: We are very confident in our products and we package them very well so you will usually receive your order in perfect condition. The warranty on the equipment is one year (12 months) and if any part of the equipment is damaged within one year due to non-human factors, we will provide a replacement part free of charge.

Q6:Can I customize products?
A: Yes, OEM&ODM is available! we can provide not only standard machines but also customized machines according to your requirements. Don't hesitate to tell us your requirement, we will try our best to meet your needs.